DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Print Server
On the Print Server page, you can configure the router as a print server. Being configured in this
way, the router will allow your LAN users to share the printer connected to the USB port of the
router.
To connect a printer to the router, power off both devices. Connect the printer to the USB port of the
router, power on the printer, then power on the router.
Figure 118. The Print Server page.
To configure the router as a print server, move the Enable print server switch to the right. Make
sure that the printer connected to the router is selected from the Printer drop-down list. Click the
APPLY button. The status of the connected device will be displayed in the Status of print
server field.
If you don't want to use the router as a print server, move the Enable print server switch to the
left and click the APPLY button.
Page 146 of 238
To Next Page
Loading...
