D-Link N300 - Creating 3 G WAN Connection

DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Figure 86. The page for creating a new Mobile Internet connection. The Modem settings section.
Parameter Description
Modem settings
MODEM/SIM CARD
SELECTION
Click the button in order to assign the connection to one of
connected USB modems.
8
Mode
The value of the field specifies the type of the network to which the
router connects. Leave the Auto value to let the router connect
automatically to an available type of network, or select a needed
value from the drop-down list.
APN
An access point name.
Dial number
A number dialed to connect to the authorization server of the
operator.
Without authorization
Move the switch to the right if your operator does not require
authorization.
Authentication protocol
Select a required authentication method from the drop-down list.
Username
A username (login) to connect to the network of the operator.
Password
A password to connect to the network of the operator. Click the
Show icon ( ) to display the entered password.
8 When several devices are connected to one USB port of the router, it is recommended to use a self-powered USB
hub.
Page 102 of 238