DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Overview
Side Panel
Figure 3. Side panel view.
Name Description
WLAN/WPS
A button to set up a wireless connection (the WPS function) and
enable/disable the wireless network.
To use the WPS function: with the device turned on, push the button,
hold it for 2 seconds, and release. The WPS LED should start
blinking.
To disable the router's wireless network: with the device turned on,
press the button, hold for 7 seconds, and release. The WLAN LED
should turn off.
USB
A port for connecting a USB device (modem, storage, printer).
Page 17 of 238
To Next Page
Loading...
