DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Overview
Back Panel
Figure 2. Back panel view.
Port Description
POWER
A button to turn the router on/off.
LAN 1-4
4 Ethernet ports to connect computers or network devices.
WAN
A port to connect to a cable or DSL modem or to a private Ethernet
line (it is recommended to use the cable included in the delivery
package).
Also, the power connector is located on the back panel of the router.
The RESET button located on the bottom panel of the router is designed to restore the factory
default settings. To restore the factory defaults, push the button (with the device turned on), hold it
for 10 seconds, and then release the button.
The device is also equipped with two external non-detachable Wi-Fi antennas.
Page 16 of 238
To Next Page
Loading...
