D-Link N300 - Page 125

DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
When the Open or WEP value is selected, the following settings are displayed on the page
(unavailable for the wireless network operating modes which support the standard 802.11n):
Figure 106. The Open value is selected from the Network authentication drop-down list.
Parameter Description
Enable encryption WEP
For Open authentication type only.
To activate WEP encryption, move the switch to the right. Upon that
the Default key ID drop-down list, the Encryption key WEP as
HEX switch, and four Encryption key fields are displayed on the
page.
Default key ID
The number of the key (from first to fourth) which will be used for
WEP encryption.
Encryption key WEP as
HEX
Move the switch to the right to set a hexadecimal number as a key
for encryption.
Encryption key
(1-4)
Keys for WEP encryption. The router uses the key selected from the
Default key ID drop-down list. It is required to specify all the
fields. Click the Show icon ( ) to display the entered key.
Page 125 of 238