D-Link N300 - Page 203

DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
To set a schedule for the DMZ, click the Set schedule button ( ). In the opened window, you
can create a new schedule (see the Schedule section, page 217) or use the existing one. Existing
schedules are displayed in the Interval of execution drop-down list in the simplified mode.
To enable the DMZ for the time specified in the schedule and disable it at the other time, select the
Enable rule value from the Action drop-down list and click the SAVE button.
To disable the DMZ for the time specified in the schedule and enable it at the other time, select the
Disable rule value from the Action drop-down list and click the SAVE button.
To change or delete the schedule for the DMZ, click the Edit schedule button ( ). In the
opened window, change the parameters and click the SAVE button or click the DELETE FROM
SCHEDULE button.
To disable the DMZ, move the Enable switch to the left and click the APPLY button.
Page 203 of 238