D-Link N300 - Page 47

DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Selecting Operation Mode
Select the needed operation mode and click the NEXT button.
Router
In order to connect your device to a wired ISP, on the Device mode page, from the Connection
method list, select the Wired connection value. Then from the Work mode list select the
Router value. In this mode you can configure a WAN connection, set your own settings for the
wireless network, configure LAN ports to connect an STB or VoIP phone, and set your own
password for access to the web-based interface of the device.
Figure 34. Selecting an operation mode. The Router mode.
In order to connect your device to the network of a 3G or LTE operator, on the Device mode
page, from the Connection method list, select the Mobile Internet value. In this mode you can
configure a 3G/LTE WAN connection, set your own settings for the wireless network, and set your
own password for access to the web-based interface of the device.
Figure 35. Selecting an operation mode. The Mobile Internet mode.
Page 47 of 238