D-Link Nuclias Connect DAP-3666

99D-Link DAP-3666 User Manual
Troubleshooting
What variables may cause my wireless products to lose reception?
D-Link products let you access your network from virtually anywhere you want, however, the positioning of the products within your
environment will aect its wireless range.
Why does my wireless connection keep dropping?
y If you are using 2.4 GHz cordless phones, X-10 equipment or other home security systems, ceiling fans, or lights, your wireless connection will
degrade dramatically or even drop. Try changing the channel of your router, access point and wireless adapter to a dierent channel to avoid
interference.
y Keep your product away - at least 3-6 feet - from electrical devices that generate RF noise like microwaves, monitors, electric motors, etc.
Why can’t I get a wireless connection?
If you have enabled encryption on the DAP-3666, you must also enable encryption on all wireless clients in order to establish a wireless
connection.
y Make sure that the SSID on the AP and the wireless client are exactly the same. If they are not, wireless connection cannot be established.
y Move the DAP-3666 and the wireless client into the same room and then test the wireless connection.
y Disable all security settings.
y Power o your DAP-3666 and the client. Turn the DAP-3666 back on again, and then turn on the client.
y Make sure that all devices are set to Infrastructure mode.
y Check that the LED indicators are indicating normal activity. If not, check that the AC power and Ethernet cables are rmly connected.
y Check that the IP address, subnet mask, gateway, and DNS settings are correctly entered for the network.
y If you are using 2.4 GHz cordless phones, X-10 equipment, or other home security systems, ceiling fans, or lights, your wireless connection
will degrade dramatically or drop altogether. Try changing the channel on your DAP-3666, and on all the devices in your network to avoid
interference.
y Keep your product away - at least 3-6 feet - from electrical devices that generate RF noise like microwaves, monitors, electric motors, etc.