D-Link ShareCenter DNS-340L

107D-Link ShareCenter DNS-340L User Manual
Section 4 - Conguration
Select a specic target in the Targets eld to designate it. The entry will
change to red. This will be the chosen target you use to connect to.
Enter a name you want the virtual volume to be called in the Share Folder
vvol eld. This is the virtual volume you will use to connect to the target.
Remember, no space between words is allowed.
Setup Authentication if you wish. If you have already setup CHAP on the
specied target, you will need to authenticate the target with the same
password you used with CHAP.
If you click No, the User Name and Password will be greyed out. If you click
Yes, the elds will open and you can enter the information per your CHAP
settings.
Click Save to save the settings or click Exit to cancel the settings.
The virtual volume appears in the table.