50D-Link ShareCenter DNS-340L User Manual
Section 3 - Installation
Under RAID Conguration, Select RAID Type, choose RAID 10. Read the
RAID 5 conguration requirements.
Click Next to continue.
With RAID 10, the drives are mirrored for redundancy and use disk striping
to help optimize reading from storage. Map Drive to Network indicates that
the NAS has separated the drive into a RAID array. Use the drop-down menus
to select drive letters to map the drives to. For further information, refer to
“Mapping a Drive” on page 59.
Note: If the size of these two drives are dierent, the excess space on the
larger drives will be formatted as a JBOD Volume.
Click Next to continue.
RAID 10
To Next Page
Loading...
Need help?
General
