D-Link ShareCenter DNS-340L

240D-Link ShareCenter DNS-340L User Manual
Section 4 - Conguration
SNMP
ShareCenter supports the SNMP protocol and can be congured to connect to an SNMP service. For example, users can use
D-Link’s D-View network management suite to monitor the status of the ShareCenter. In this section you can congure the
SNMP function by setting the community of SNMP, the destination of traps, and notications.
Select to Enable or Disable the SNMP function.
Community name of NAS, default is “public”.
Enable or Disable trap support.
The IP of the destination of trap.
SNMP:
SNMP Community:
Notication:
Notication IP: