28D-Link ShareCenter DNS-340L User Manual
Section 3 - Installation
With the power on, press the Next button in the Setup Wizard and check and
make sure the IP address of your ShareCenter matches what you see on the
screen.
Note: Allow 1-2 minutes for the DNS-340L to be recognized.
Click Next to continue.
Setting up the NAS
A warning message will appear prompting you to conrm that the LED on
the front of your device is blinking. If so, click Yes to proceed.
Click Next to continue.
Note: To double-check the NAS’s IP address, go to settings of your local
router and check the IP address table.
To Next Page
Loading...
