D-Link ShareCenter DNS-340L

346D-Link ShareCenter DNS-340L User Manual
Section 4 - Conguration
COMPONENT DESCRIPTION
Motion Detection
When using the Record by Schedule mode together with the Motion Detection function, you
must rst click the Go to Web link and log in to the camera’s web interface and enable the
motion detection function on that camera. Please refer to the manual of your camera for more
information on enabling motion detection.
Copy Copy the camera recording setup to other similar cameras
Quota Settings
Congurable per camera. Indicates the maximum amount of disk space will be used for
recordings.
Automatic Overwrite
Click this checkbox if you wish to overwrite the earliest recorded video with the latest video if
reaches the quota limitation or disk space is full.
Quota
Click this checkbox to set the amount of storage you want to allocate to each camera. Next to it
the remaining free disk space is displayed
Keep the File within This indicates how long you want to keep the recorded camera video les before it is overwritten.
Estimate Required
Space
Click this button to nd out how much disk space is required for video storage with the current
settings.
Event Record: Pre-
record
If required, select how long video should be recorded for, prior to an event alarm being triggered
(1-180 seconds).
Event Record: Post
Record
If required, select how long video should be recorded for following an event alarm being
triggered (1-180 seconds).
Record Mode No Record - no recording is made.
Record Mode
Record by Schedule - Drag and drop on the weekly map below
• Always Record means that the camera will always record for the specied period.
• Motion Detection Record will wait for motion on the camera to be detected before it
begins recording.
• Event Record will wait for an event on the camera to be triggered before it begins
recording
Record Mode Manual Record - requires you to manually click a record button to begin recording.