25
8-7. Lock set-up
You can prevent any accidental operation due to the unnecessary key control by Lock
set-up. After finishing calibration, it is recommended to set the Lock.
At the first stage, please start while the power is OFF.
Related Function when Lock is set : Function related to calibration, DATA BACK-UP &
RESTORE function etc.
Power is off
While key is being
pressed, turn the power on
Please keep pressing key while this is being displayed
or display
Set-up is completed
Please select lock or release by pressing key.
ON : Lock is selected, Off : Lock release is selected.
To Next Page
Loading...
Need help?
General
