Dacia DUSTER 2024 - Page 281

AIR VENTS, HEATING AND AIR CONDITIONING
4
Your comfort - 279
selected 8 isdisplayedonthemulti
media screen. The positions are in the
following order:
All the air is then directed to the
windscreen and front side window
demisting vents.
Theairflowisdistributedbe
tween front side window demisting
vents, the windscreen demisting vents
and the footwells.
Theairflowisdistributedbe
tween the front side window demisting
vents, the windscreen demisting vents,
the dashboard air vents and the
footwells.
The air flow is mainly directed to
the dashboard air vents.
The air flow is directed towards
the dashboard vents and towards the
footwells.
The air flow is directed mainly
towards the footwells.
Adjusting the air temperature
Press the button 17 then use the tab
on the multimedia screen to adjust the
air temperature. The further towards
theredtheslideis,thehigherthetem
perature will be.
When the air conditioning system is
used for long periods, it may begin to
feel cold. To increase the temperature,
press 17 then raise the tab upwards
on the multimedia screen.
Adjusting the ventilation fan speed
In automatic mode, the system uses
the most suitable amount of air to
reachandmaintainthedesiredcom
fort level.
Youwillstillbeabletoadjusttheventi
lation speed by pressing the control 16
to increase or reduce the ventilation
speed.
"Clear View" function
Press the button 15 and the built-in
warning light comes on.
This function quickly de-mists the
windscreen, rear screen, front side
windows and door mirrors (depending
onthevehicle).Itautomaticallyacti
vates the air conditioning and rear
screen de-icing functions.
To exit this function, press the button
15 or the button 13 again(configura
tion A ).
Somebuttonshaveanop
erating light indicating their
operative state.
Rearscreendeicinganddemist
ing
Press button 14 andthebuiltinwarn
inglightcomeson.Thisfunctionen
ables rapid demisting or de-icing of the
rear screen and de-icing of the rear
view mirrors (on equipped vehicles).
To exit this function, press button 14
again. Demisting automatically stops.