TRANSPORTING OBJECTS
4
304 - Your comfort
either the transverse position (carrying
position) or the longitudinal position
(standard position).
To place the bars in the transverse
position:
– unclip the rotary covers
1
and put
themintheverticalposition(move
ment
A
);
– loosen the bolts
2
using the torque
wrench
6
(seethefollowingpages),lo
cated in the glovebox;
– raise bars
3
and
4
and fit them in
transverse position
5
. To do this, place
the bar
3
(movement
B
) in the front
position, then place the bar
4
(move
ment
C
) in the rear position.
Note: make sure that bars
3
and
4
are correctly positioned.
Permissible weight on
roof bars: 🡺380.
It is forbidden to attach
any carrying device on
roofforvehiclesnotorig
inallyfittedwithlongitudi
nal or modular roof bars.
– use the tool
6
to tighten the bolts
2
:
markers
D
and
E
located on the tool
are offset (mark
7
);
To Next Page
Loading...
