TD2O509S
1.
Pull the parking brake lever (2) up
with the brake pedals depressed fully
to engage the pedals with the latch.
If the braking force is insufcient, de-
press the pedals more rmly.
2. Before leaving the tractor after
parking it, make sure to stop the
PTO, lower the implement onto the
ground, and stop the engine.
3. If it is necessary to leave the tractor
with the engine running, put all the
shift levers in the neutral position
and apply the parking brake rmly.
4. When parking the tractor on a
slope, stop the engine with the
parking brake applied and all gears
engaged in the low speed position.
5. If it is necessary to park the tractor
on a slope with the engine run-
ning, apply the parking brake and
chock(1) all four wheels.
6. To release the parking brake, de-
press the brake pedals rmly once
again.
WARNING
The brake pad can be rapidly
worn if you drive with the park-
ing brake applied.
Never park the tractor on a
steep slope in any circum-
stance. A severe accident can
occur.
•
•
WARNING
To avoid possible injury, death
or loss of property from a ma-
chine runaway:
With the engine off, the tractor
may move unexpectedly re-
gardless of the gear shift posi-
tion. Before leaving the trac-
tor, certainly apply the parking
brake to prevent machine run-
away.
※
Only H-shuttle model.
•
To Next Page
Loading...
Need help?
General