t46w031A
WARNING
Do not weld or apply heat to
the tire rim or disc. The tire
can explode due to the rapidly
increased pressure in the tire.
Check tires for ination pres-
sure, damage, deformation,
and excessive wear on lug
and damage of rim and disc.
Also check if wheel bolts, rim
bolts, and nuts are loose.
•
•
td2O457A
TREAD
When working on a eld where c are linearly aligned, the tread should be ad-
justed so that the tires do not cross over the c. Also, it is necessary to increase
the tread to prevent any accident when working on a slope or trailing.
(1) Bolt (2) Rim bolt (3) Rim (4) Disc
WARNING
Never operate tractor with a loose rim, wheel, or axle.
Always tighten nuts or bolts to the specied torque.
Make sure to perform inspection daily.
•
•
To Next Page
Loading...
