EasyManua.ls Logo

Daedong KIOTI DK4510 - Engine Coolant Temperature Gauge

Daedong KIOTI DK4510
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
-
12
DK4510 / DK5010 / DK5510
WARNING
If the low fuel level warning
lamp on the instrument cluster
is illuminated, add fuel to the
tank immediately.
NOTE
Make sure to use only genuine
fuel as the engine can be dam-
aged if unqualied fuel is used.
Use fuel for winter season in
cold weather to start the engine
easier.
The gauge needle can move on
a hill as fuel slopes in the tank.
ENGINE COOLANT TEMPERATURE GAUGE
This gauge indicates the coolant
temperature after the key switch is
turned to the “ON” position.
C: Coolant is cold.
H: Coolant is hot.
When the pointer is in the zone “H"
during driving, it means that the en-
gine is overheated. Decrease work
load immediately.
(1) Coolant Temperature Gauge
C: Cold H: Hot
CAUTION
Make sure to control the work
load so that the needle is not
in the red zone.
If the needle stays in the red
zone, do not stop the engine im-
mediately. Instead, reduce the
work load to cool down the en-
gine before stopping the engine.
Make sure to keep the front
grill clean so that air is sucked
through it freely for fast cooling.
td2O419C
TD200(DK4510,5010,5510-SA)-동남아향-12 12 2017-02-07 오전 9:32:55

Table of Contents

Related product manuals