NOTE
If the implement won't be lifted,
press the one-touch switch (Lift-
ing/lowering). Otherwise, lower
the position control lever com-
pletely and lift it again.
•
TD2O505S
(1) Position Control Lever
(A) “UP”
4. If an implement is attached, push
the position control lever back-
wards to lift the implement.
5. Increase slowly the engine RPM
from idle speed to medium speed.
(1) Hand Throttle Lever
: Slow : Fast
(1) Parking Brake (2) Brake Pedal
(A) Depress
TD2O506S
6. Depress the brake pedal to release
the parking brake.
TD200(DK4510,5010,5510-SA)-동남아향-11 11 2017-02-07 오전 9:37:18