38
Timer Review – changing and erasing
Call the player’s "MAIN SETUP",
choose "TIMER PROGRAM".
1
Select the programming to change or erase.
If you want to erase this programming press button
[0], confirm with OK.
If you wish to make changes:
Move to the position you want to change using the
[< , >] buttons.
Change the settings using the [PR +/–] or [number]
buttons.
If all setting are ok, press [< or >], till you see "OK:
CONFIRM" in the bottom line.
Confirm changes with OK. Exit the menus.
2
TIMER PROGRAM
PR START END DATE
03 21:20 22:20 14/10
01 18:10 20:30 20/10
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
-- -- : -- -- : -- -- / --
PR+/-:SELECT
OK:CONFIRM SETUP:END
TIMER PROGRAM (ONCE)
PR 03
START TIME 21:20
END TIME 22:20
START DATE 14/10(SAT)
TAPE SPEED SP
VPS/PDC ON
0 :ERASE
</>:CORRECT SETUP:END
DVD-Video(PAL) 02.3.15 5:44 PM ˘`38
To Next Page
Loading...
