DVD Operation
55
Selecting ZOOM and Multi Angle
Using a zoom function
A user can enlarge the current screen about 1.3, 1.5 or 2.0 times.
Keep pressing [ZOOM] button till the preferred
zoom appears.
Every time a user presses [ZOOM] button, a zoom
magnification changes 1.3 times (X1.3) 1.5 times (X1.5)
2.0 times (X2.0) Off 1.3 times (X1.3) ... one
by one.
A base point to be enlarged is center and the point can be
changed with the operation of [ ] button.
■ Before setting it, you should change status into DVD by pressing [DVD] button on the
remote control.
X2
Different Angle
If a disc includes multi angle information, a user can watch a screen in multi angles. The function is limited to a
DVD disc supporting multi angle information.
Keep pressing [ANGLE] button till the preferred
angle appears.
Every time a user presses [ANGLE] button, an angle degrees
changes in a consecutive order.
■ Before setting it, you should change status into DVD by pressing [DVD] button on the
remote control.
1/3
N O T E
• When “TV ASPECT”
item is set to “4:3 PS”
in setup screen, or
with certain discs, 2
times Zoom may not
function properly.
DVD-Video(PAL) 02.3.15 5:45 PM ˘`55
To Next Page
Loading...
