70
Before doubting about troubles (DVD)
• The recorder does not play.
• No sound comes through.
• A disc is playing but screen does
not appear or poor screen appears.
• Sound is irregular
• remote control does not work.
• Dolby digital 5.1 CH sound does
not work
• “AUDIO” or “SUBTITLE” button
does not work.
Checks
Symptom
➤ If a DVD is from overseas, it may not be played. Please check a
DVD’s region code whether it has the relative region code 2 or All.
➤ Please check whether a DVD is inserted in a right direction.
➤ If it is a CD-ROM for PC or DVD-ROM, it does not work.
➤ Play mode may be “SLOW” or “PAUSE”(In abnormal speed play,
no sound comes through)
➤ Did you connect the parts in right way?
➤ Please check the operative condition of TV or amplifier.
➤ From “DEFAULT” SET, please check “AUDIO” items.
➤ Did you turn on your TV sets?
➤ Did you connect the parts in right way?
➤ The play may be in “PAUSE”.
➤ A disc may have some contaminants or be damaged.
➤ A disc may be bad one.
➤ Please check the connection with Dolby digital amplifier.
➤ Please check the plugs are connected with one another tightly.
➤ Some contaminants may be remained in connection terminal.
➤ Please check the degree of the remote control, distance or any
interruption.
➤ Battery may be weak or exhausted.
➤ When you operate DVD, use it by pressing [DVD] button.
➤ Dolby digital 5.1 CH sound can be worked in the Dolby digital
amplifier only.
➤ Please check “Dolby digital 5.1 CH” mark on your DVD.
➤ In case of playing it through digital output, while pressing “STOP”,
please check whether “DIGITAL OUTPUT” is “BITSTREAM” by
pressing “SETUP”.
➤ Please check the connection is correct.
➤ If a DVD does not include language information, it does not
support the function.
DVD-Video(PAL) 02.3.15 5:45 PM ˘`70
To Next Page
Loading...
