Switch Configuration 33
A bond must be bound before the binding to enable the switch to open, And if you want to
access shall be binding and switch the IP address of the same network segment .
【Configuration Example】
Such as: the binding to make first can open, must be a key bindings port 7
Configuration example I Figure 4-53
Configuration example II Figure 4-54
Configuration example IV Figure 4-55
Can check the delete option.
4.4.2 Channel detection
4.4.2.1 Ping
In the navigation bar to select "fault/safety> channel detection>ping", Use ping function to
test internet connect and host whether to arrive. The following picture:
To Next Page
Loading...
Need help?
General
