Dahua Technology DHI-XVR5116HS-S2 User Manual

User's Manual
93
Parameter
Description
The value ranges from 0 to 100. The default value is 50. The recommended
range is between 40 and 60.
Brightness
Adjusts the image brightness. The bigger the value is, the brighter the
image will become. You can adjust this value when the image as a whole
looks dark or bright. However, the image is likely to become dim if the
value is too big.
The value ranges from 0 to 100. The default value is 50. The recommended
range is between 40 and 60.
Hue
Adjusts the hue of image. The value ranges from 0 to 100. The default
value is 50.
Sharpness
Adjusts the sharpness of image edge. The bigger the value is, the more
obvious the image edge, and the noise is also greater.
The value ranges from 1 to 15. The default value is 1.
Image Enhance
Adjusts the image definition. The bigger the value is, the clearer the image
will become, but there will be more noises.
NR
Reduces the noises from image. The bigger the value is, the better the
image will become.
Config File
In the
Config File
list, select
Day
,
Night
,
Normal
, or
Switch By Period
.
The system configures the parameters correspondingly.
Day: Apply the configuration during daytime.
Night: Apply the configuration during nighttime.
Normal: Apply the configuration during day and night.
Switch by Period: If you select this option, you need to configure the
sunrise time and sunset time where you are located.
Mirror
Enable the function, the left and right side of the video image will be
switched. It is disabled by default.
3D Denoise
This function specially applies to the image which frame rate is configured
as 2 at least. It reduces the noises by making use of the information
between two frames. The bigger the value is, the better the effect.
Flip
In the
Flip
list, you can select
180°
to change the video image display.
By default, the setting is
No Flip
.
Light
In the
Light
list, select
Close
or
Enable
to use the backlight compensation
or not.
Scene Mode
Configure the white balance to adjust the general hue of the image. The
default setting is
Auto
.
Auto: Automatically apply white balance to different colors to make
the image color display normally.
Sunny: Apply the threshold value to sunny environment.
Night: Apply the threshold value to night.
Customized: Manually adjust the Red Gain and Blue Gain values.
Day & Night
Configure the color and black&white mode of the image. This setting is
not affected by the configuration files. The default setting is
Auto
.
Color: The camera outputs color image only.

Dahua Technology DHI-XVR5116HS-S2 Specifications

General

Brand	Dahua Technology
Model	DHI-XVR5116HS-S2
Category	DVR
Language	English