User's Manual
100
Coaxial upgrade
Click Browse.
The Browse interface is displayed.
Select the upgrade file and click OK.
The COAXIAL UPGRADE interface is displayed.
You need to insert the USB storage device that contains the upgrading files.
Select the check box of the channel that you want to upgrade.
Click Start Upgrade.
If the upgrading is successful, the system pops up a message indicating the upgrading is
completed. If the upgrading is failed, please check if the Device
Configuring Remote Devices
5.6.1 Adding Remote Devices
This function is available after you have configured the channel type as IP channel as described in
previous section, see "5.5.6 Configuring Channel Type."
You can add remote devices by adding the IP address.
To Next Page
Loading...
Need help?
General
