User's Manual
124
Playing Back Video
5.9.1 Enabling Record Control
Manual recording operation requires the user have the permission to access STORAGE settings.
Check to ensure the HDD installed in the Device has been formatted properly.
To enter the record control interface, do the following:
Right-click on the live view screen, the shortcut menu is displayed. On the shortcut menu,
select Manual > Record Control.
RECORD
Configure the settings for the record control parameters.
Table 5-32 Record control parameters
Channel
Displays all the analog channels and the connected digital channels. You
can select a single channel or select
.
Record status
Auto: Automatically record according to the record type and
recording time as configured in the recording schedule.
: Keep general recording for 24 hours for the selected channel.
: Do not record.
Snapshot status Enable or disable the scheduled snapshot for the corresponding channels.