User's Manual
84
Stop Bits The default is 1.
Parity The default is NONE.
Click Apply to save the settings.
Click Copy to copy the settings to other channels.
5.4.2 Working with PTZ Control Panel
PTZ control panel performs the operations such as directing camera in eight directions, adjusting
zoom, focus and iris settings, and quick positioning.
Basic PTZ Control Panel
Right-click on the live view screen and then select PTZ. The PTZ control panel is displayed.
PTZ
The functions with buttons in gray are not supported by the system.
Table 5-21 PTZ parameters
Speed
Controls the movement speed. The bigger the value is, the faster the
movement will be.
Zoom
: Wide angle.
: Long shot.
Focus
: Zoom in.
: Zoom out.
Iris
: Small.
: Large.
PTZ movement Supports eight directions.
To Next Page
Loading...
