User's Manual
141
Define for all days of a week: Click All, all switches to . On the timeline of
any day, click the half-hour blocks to select the active periods, all the days will take
the same settings.
Define the period by editing. Take Sunday as an example.
1) Click
.
Period
2) Enter the time frame for the period, and then select the check box to enable the
settings.
There are six periods for you to set for each day.
Under
Copy to, select All to apply the settings to all the days of a week, or select
specific day(s) that you want to apply the settings to.
3) Click
OK to save the settings.
On the Motion Detection interface, click Apply to complete the settings.
5.10.1.2 Configuring Video Loss Settings
When the video loss occurs, the system activates the alarm.
Select Main Menu > ALARM > Video Detection > Video Loss.
To Next Page
Loading...
Need help?
General
