User's Manual
168
Local
Configure the settings for the local alarms.
Table 5-48 Alarm settings
Alarm In Select the channel number.
Alarm Name Enter the customized alarm name.
Enable Enable or disable the local alarm function.
Type In the
list, select
or select
as the voltage output type.
Period
Click
to display setting interface.
Define a period during which the motion detection is active. For details, see
"Setting Motion Detection Period" section in "5.10.1.1 Configuring Motion
Detection Settings."
Anti-Dither
Configure the event detection lasting time. The system records only one
event during this period. The value ranges from 5 seconds to 600 seconds.
Alarm Out
Click
to display setting interface.
General Alarm: Enable alarm activation through the alarm devices
connected to the selected output port.
External Alarm: Enable alarm activation through the connected alarm
box.
Wireless Siren: Enable alarm activation through devices connected by
USB gateway or camera gateway.
To Next Page
Loading...
Need help?
General
