User's Manual
61
Select the check box of event type, and then click to clear the defined period.
When selecting MD&Alarm, the respective check box of MD and Alarm will be
cleared.
Define the period by editing. Take Sunday as an example.
1) Click .
The Period interface is displayed.
Period
2) Enter the time frame for the period and select the event check box.
There are six periods for you to set for each day.
Under
Copy, select All to apply the settings to all the days of a week, or select specific
day(s) that you want to apply the settings to.
3) Click
Apply to save the settings.
Click Apply to complete the settings.
Click Copy to copy the settings to other channels.
After configuring the recording schedule settings, you need to perform the following
operations to start recording according to the defined schedule.
Enable the alarm event and cofigure the settings for the recording channel. For
details, see "5.10 Alarm Events Settings."
You need to enable the recording function, see "5.9.1 Enabling Record Control."
5.1.4.10 Configuring Snapshot Storage Schedule
You can configure the storage schedule for the snapshot such as channels to take snapshot, alarm
settings, and the armed period.
You can also configure snapshot storage settings by selecting
Main Menu > STORAGE > SCHEDULE >
Snapshot.
To Next Page
Loading...
Need help?
General
