Dahua Technology VTH5421E Series User Manual

59
Figure 3-29 Wired zone
Table 3-7 Parameter description
Paramete
r
Description
Area The number cannot be modified.
NO/NC
Select NO (normally open) or NC (normally closed) according to detector type. It
shall be the same as detector type.
Type
Select corresponding type according to detector type, including IR, gas, smoke,
urgency btn, door, burglar alarm, perimeter and doorbell.
Status
●
Instant Alarm
: After armed, if an alarm
is triggered, the device produces siren
at once and enters alarm status.
●
Delay Alarm
: After armed, if an alarm
is triggered, the device enters alarm
status after a specified time, during
which you can disarm and cancel the
alarm.
●
Bypass
: Alarm will not be triggered in
the area. After disarmed, this area will
restore to normal working status.
●
Remove
: The area is invalid during
arm/disarm.
●
24 Hour
: Alarm will be triggered all the
time in the area regardless of arm or
disarm.
A zone in
Remove
status cannot be
bypassed.
●
Instant Alarm
: After armed, if
an alarm is triggered, the device
produces siren at once and
enters alarm status.
●
Delay Alarm
: After armed, if an
alarm is triggered, the device
enters alarm status after a
specified time, during which you
can disarm and cancel the alarm.
●
Bypass
: Alarm will not be
triggered in the area. After
disarmed, this area will restore
to normal working status.
●
Remove
: The area is invalid
during arm/disarm.
●
24 Hour
: Alarm will be triggered
all the time in the area
regardless of arm or disarm.
A zone in
Remove
status cannot be
bypassed.

Dahua Technology VTH5421E Series Specifications

General

Brand	Dahua Technology
Model	VTH5421E Series
Category	Conference System
Language	English