62
alarm system.
●
Away
: Arm the system when you leave the area of the alarm system.
●
Sleep
: An alarming mode that allows you to arm the system in the sleep time.
●
Custom
: Arm the system based on your customized needs.
Step 3 Turn on or turn off the area you selected to enable or disable the arm mode.
Multiple areas can be added into one arm mode simultaneously, whereas one area can be
added into different modes.
Figure 3-32 Mode setting-Area
Step 4 (Optional) Tap to page down the screen to where the
WirelessArea
is located, and
then turn on or turn off the area you selected to add it into or remove from the arm mode.
To Next Page
Loading...