Dahua 41HS-W-S2 Series User Manual

138
③Connect to the HDD data cable to the main board
and the HDD port respectively. Loosen the power cable
of the chassis and connect another end of the power
cable to the HDD port.
④After connect the cable, put the front cover
back to the device and then fix screws of the rear
panel.
3.3.7 NVR78-RH Series
①Turn the key into the hole in the front
panel.
②Open the front panel.
③ Put the HDD to the slot and adjust the
handle to secure it.
④Put the front panel back and use the key to fix
firmly.
HDD Handle Installation

Dahua 41HS-W-S2 Series Specifications

General

Brand	Dahua
Model	41HS-W-S2 Series
Category	Network Hardware
Language	English