Dahua 41HS-W-S2 Series User Manual

350
Figure 5-70
For detailed setups, please refer to chapter 5.8.3.1.1 motion detect for detailed information.
5.8.3.3 Face Detect (Optional)
Please make sure you are connecting to the smart network camera, otherwise you can not use
IVS function!
When camera detects human face, system can generate an alarm.
From main menu->Setup->Event->Face detect, the interface is shown as in Figure 5-71.
 Enable face boost: Check the box here, system can enhance the human face display pane.
 Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity.
For detailed setups, please refer to chapter 5.8.3.1.1.
Figure 5-71

Dahua 41HS-W-S2 Series Specifications

General

Brand	Dahua
Model	41HS-W-S2 Series
Category	Network Hardware
Language	English