Dahua 5000 Series User Manual

Introduction 2
No.
Icon
Function
4
Navigation bar.
Homepage.
Return.
5
Fn
Function key. It is line scanning by default.
Preset
Make PTZ control, and configure preset point.
Tour
Make PTZ control, and tour between points.
Aux
Auxiliary key. It is pattern by default.
6
—
Includes remote control lever, auxiliary menu and
function operation.
Key Module 1.2
 Key module is not available in platform preview mode.
 F1 cannot be called in platform TV wall mode.
After key module is connected to network keyboard through USB or Bluetooth successfully,
green light at the upper right corner will be on for 10s and then turn off. For appearance of key
module, see Figure 1-2. For details, see Table 1-2.
When key module is connected with network keyboard, turn on main switch at the side of key
module. For Bluetooth connection, default Wi-Fi network name is "KEYBOARD".
Key module Figure 1-2
Table 1-2 Key description
Key
Example
Function
F1
Number 1 to 16 +F1
Call No. 1 to 16 plans quickly. It applies to
preview and TV wall functions.
View the plan numbers on the Plan
Management interface.
F2
Number 1 to 16 +F2
Call No. 1 to 16 MAC plans quickly.
View the Mac plan numbers on the MAC
interface.
F3
Press F3
Reserved.
F4
Press F4
Reserved.

Dahua 5000 Series Specifications

General

Brand	Dahua
Model	5000 Series
Category	Keyboard
Language	English