Double click one mark information item, you can see system pops up a dialogue box for
you to change mark information. You can only change mark name here.
Delete
Here you can check the mark information item you want to delete and then click Delete
button, you can remove one mark item. .
Note
After you go to the mark management interface, system needs to pause current
playback. System resume playback after you exit mark management interface.
If the mark file you want to playback has been removed, system begins playback from
the first file in the list.
4.9.1.4 Customized Playback
You can select one or more channel(s) to playback at the same time.
From main menu->Search or you can right click mouse on the preview interface and then
select Search, you can go to Figure 4-36.
In pane 4, click , you can see the following interface. See Figure 4-41.
Figure 4-41
Now you can select one or more channel(s) and then click to search record(s).
System supports one or more channels. The window split mode can auto adjust according
to the channel amount. System max supports 16-split.
Click button to select all channels at the same time.
Click , system begins playback.
4.9.1.5 Splice Playback
For the large record file, you can use splice playback function to play the same file in
several sections at the same time. It is very convenient for you to find the video footages
you desire.
On the main menu, click Search button, or right click mouse and then select Search. You can
go to the Figure 4-36.
To Next Page
Loading...
Need help?
General