Table 4-1
4.3 Video on Wall
Step 1 At “Preview” interface, select VGA or HDMI1～HDMI4 in pull-down dialog box.
Step 2 Select video source in the right, drag it onto TV wall or double click the video source.
Quick Video on Wall (Optional)
Click , and a dialog box will pop out, as shown in Figure 4-2. Enter “Number (such as 1)+
”, so no. 1 device will be on wall quickly.
Please refer to “8.1.2 Input Channel” to inquire “Number” in the input channel.
Figure 4-2
Quick Search for Added Device (Optional)
In the input box behind , enter keywords of the added device, so as to search the added
device.
Click the popped out language box, as shown in Figure 4-3. Press [Shift] key to switch the input
method.
To Next Page
Loading...
