17
4.5 Snapshot
At “Preview” interface, insert a USB disk into Internet keyboard, and click after checking
USB disk.
4.6 Recording
At “Preview” interface, insert a USB disk into Internet keyboard, and click after checking
USB disk.
4.7 Snapshot and Recording Settings
Step 1 At “Preview” interface, click . The system displays “Snap & Record” interface, as
shown in Figure 4-4.
Figure 4-4
Step 2 Insert a USB disk into Internet keyboard.
Step 3 Click “Check”. The system displays general storage disk name and device storage.
Step 4 Set the parameters. Please refer to Table 4-2 for details.
To Next Page
Loading...
