Dahua NKB5000 Series - Add Network Signal; Signal Group

20
5.1.2 Add Network Signal
Search or add network signals manually.
Step 1 Select “Settings > Signal > Network Signal”. The system displays “Network Signal”
interface, as shown in Figure 5-2.
Figure 5-2
Step 2 Add network signals.
 Click “Device Search” to show search results, select the needed device and click
“Add”.
 Click “Manual Add” to set parameters in the popped out dialog box.
5.1.3 Signal Group
Select “Settings > Signal > Signal Group”. The system displays “Signal Group” interface, as
shown in Figure 5-3. Devices in the device list can be added to group list.