Dahua NKB5000 Series - Settings; Device Management

34
8 Settings
It consists of four parts, namely, device, general, account and system.
8.1 Device Management
8.1.1 Add Device
Please refer to “3.5 Add Device”.
8.1.2 Input Channel
Display input no., channel no., name, device, IP address and protocol of all channels.
Meanwhile, modify input channel no..
At “Settings” interface, click “Device”, and then click “Input Channel” tab to enter “Input Channel”
interface, as shown in Figure 8-1.
Figure 8-1
Modify Input Channel No.
Click to modify input channel no. in the popped out dialog box.