35
8.2 General Settings
8.2.1 Wired Network
Please refer to “3.4.1 Wired Network” for details.
8.2.2 Wi-Fi
Please refer to “3.4.2 Wi-Fi” for details.
8.2.3 Bluetooth
Default Bluetooth name of internet keyboard is “KEYBOARD”.
Step 1 At “General” interface, click “Bluetooth” tab to enter “Bluetooth” interface.
Step 2 Click to enable Bluetooth.
Step 3 Click to search nearby Bluetooth device.
Step 4 Double click the searched device and the system will display “Connecting”. After
several seconds, the system will display “Connected”, so it is connected successfully,
as shown in Figure 8-2.
Figure 8-2
8.2.4 Serial Port
Step 1 At “General” interface, click “Serial” tab to enter “Serial” interface, as shown in Figure
8-3.
To Next Page
Loading...
