Local Basic Operations 109
Click the AUX
Config icon to
open the PTZ
functions
settings
interface.
Click the Enter
Menu icon to
open the MENU
OPERATION
interface.
4.4.3 Configuring PTZ Functions
4.4.3.1 Configuring Presets
Step 1 On the Expanded PTZ Control Panel, click .
The Preset interface is displayed. See Figure 4-86.
Figure 4-86
Step 2 Click the direction arrows to the required position.
Step 3 In the Preset box, enter the value to represent the required position.
Step 4 Click Setting to complete the preset settings.
4.4.3.2 Configuring Tours
Step 1 On the Expanded PTZ Control Panel, click .
The PTZ interface is displayed.
Step 2 Click the Tour tab.
The Tour tab is displayed. See Figure 4-87.