Local Basic Operations 282
Step 3 Set user name, password and then select group from the dropdown list.
Step 4 Click OK to complete setup.
Click to modify corresponding user information, click to delete current user.
4.16 Output and Display
4.16.1 Display
You can configure the display effect such as displaying time title and channel title, adjusting
image transparency, and selecting the resolution.
Step 1 Select Main Menu > DISPLAY > Display.
The Display interface is displayed. See Figure 4-253.
Figure 4-253
Step 2 Configure the settings for the display parameters. See Table 4-70.
Table 4-70
Set the transparency of the local menu of the NVR device. The higher
the transparency, the more transparent the local menu.
To Next Page
Loading...
