Dahua NVR4832-I - Channel Name

Local Basic Operations 84
Parameter
Description
 Timing: The snapshot is taken during the scheduled period.
 Trigger: The snapshot is taken when there is an alarm event
occurs, such as motion detection event, video loss, and local
alarms.
Image Size
In the Image Size list, select a value for the image. The bigger the
value is, the better the image will become.
Image Quality
Configure the image quality by 6 levels. The higher the level is, the
better the image will become.
Interval
Configure or customize the snapshot frequency. Max. supports 3600
seconds/image.
Step 3 Click Apply.
4.2.6 Channel Name
You can set customized channel name.
Step 1 Select Main Menu > CAMERA >CAM NAME.
The CAM NAME interface is displayed. See Figure 4-58.
Figure 4-58
Step 2 Modify a channel name.