Local Basic Operations 248
Includes MD5 and SHA. The system recognizes automatically.
Enter the password for authentication type and encryption type.
The password should be no less than eight characters.
In the Encryption Type list, select an encryption type. The default
setting is CBC-DES.
Step 3 Compile the two MIB files by MIB Builder.
Step 4 Run MG-SOFT MIB Browser to load in the module from compilation.
Step 5 On the MG-SOFT MIB Browser, enter the Device IP that you want to manage, and then
select the version number to query.
Step 6 On the MG-SOFT MIB Browser, unfold the tree-structured directory to obtain the
configurations of the Device, such as the channels quantity and software version.
4.12.8 Multicast
When you access the Device from the network to view the video, if the access is exceeded, the
video will not display. You can use the multicast function to group the IP to solve the problem.
Step 1 Select Main Menu > NETWORK > MULTICAST.
The MULTICAST interface is displayed. See Figure 4-216.
Figure 4-216
To Next Page
Loading...
Need help?
General