Local Basic Operations 236
During backup process, you can click ESC to exit current interface for other
operation (For some series product only). The system will not terminate backup
process. (This function is for some series products only.)
System pops up corresponding dialogue box if there is no backup device, or no
backup file, or error occurs during backup process.
The file name format usually is: Channel number+Record type+Time. In the file
name, the YDM format is Y+M+D+H+M+S. File extension name is .dav.
Click Onekey Backup to back up all required files.
4.12 Network
You can set NVR network parameters so that the NVR can communicate with devices in the
same LAN.
4.12.1 TCP/IP
Select Main Menu > NETWORK > TCP/IP, the TCP/IP interface is displayed. See Figure 4-208.
Figure 4-208
Table 4-53
Multi-address: Two Ethernet ports work separately through either
of which you can request the Device to provide the services such
as HTTP and RTSP. You need to configure a default Ethernet port
(usually the Ethernet port 1 by default) to request the services from
the device end such as DHCP, Email and FTP. If one of the two
Ethernet ports is disconnected as detected by networking testing,
the system network status is regarded as offline.
To Next Page
Loading...
Need help?
General