Local Basic Operations 253
Mobile APP Operation
The following contents are introduced in the example of mobile App.
Step 1 Scan the QR code to download and install the mobile App.
Step 2 Select Camera and enter the main interface.
Step 3 Register device in the mobile App:
1) Click and select Device Manager. See Figure 4-220.
Figure 4-220
2) Click and enter the Add Device interface.
Mobile App supports device initialization.
3) Select Wired Device > P2P to enter the P2P interface.
4) Click the QR code icon behind the SN to enter the QR code scan interface.
5) Scan the device label or scan the SN QR code got by selecting Main Menu >
Network > P2P. When the scan is successful, the device SN will be displayed in
the SN item.
6) Enter name and password.
Step 4 After device registration on mobile App, click Start Preview and you can see the monitor
screen.
4.12.12 802.1X
Device needs to pass 802.1x certification to enter the LAN.
Step 1 Select Main Menu > NETWORK > 802.1x.
The 802.1x interface is displayed. See Figure 4-221 or Figure 4-222.
To Next Page
Loading...
Need help?
General