Dahua NVR4832-I User Manual

Local Basic Operations 247
Figure 4-215
Step 2 Configure the settings for the SNMP parameters. See Table 4-58.
Table 4-58
Parameter
Description
Enable
Enable the SNMP function.
Version
Select the check box of SNMP version(s) that you are using.
The default version is V3. There is a risk of select V1 or V2.
SNMP Port
Indicates the monitoring port on the agent program.
Read Community
Indicates the read/write strings supported by the agent program.
Write Community
Trap Address
Indicates the destination address for the agent program to send the
Trap information.
Trap Port
Indicates the destination port for the agent program to send the
Trap information.
Read Only User
Enter the user name that is allowed to access the Device and has
the "Read Only" permission.
Read/Write User
Enter the user name that is allowed to access the Device and has
the "Read and Write" permission.

Dahua NVR4832-I Specifications

General

Brand	Dahua
Model	NVR4832-I
Category	DVR
Language	English