Local Basic Operations 184
Figure 4-160
Step 3 Input human face library name and then click Save.
System successfully saves the face library.
Adding Face Pictures
You can add face pictures to the existing libraries one by one or by batch, or add from the
detected faces.
To add face pictures one by one or by batch, you need to get the pictures from the USB storage
device. The picture size should be smaller than 256K with resolution between
200×200–6000×5000.
Adding One Face Picture
You can add one face picture to the database. It is for the scenario that the registered human
face picture amount is small.
Step 1 Select Main Menu > AI > DATABASE > FACE LIBRARY.
The FACE LIBRARY interface is displayed.
Step 2 Click of the library that you want to configure.
The Details interface is displayed. See Figure 4-161.
To Next Page
Loading...
Need help?
General